Most plastics used for 3D printing filament are hygroscopic – meaning that the material absorbs moisture, even from the surrounding air. Keeping filaments dry isn’t difficult, as you can store them in Ziploc bags with added dehydrating agents like silica gel or vacuum seal them.
How long does it take for filament to dry out?
To dry filament, you can use a specialized filament dryer by setting the required temperature and drying for about 4-6 hours. You can also use an oven or a vacuum bag with desiccant packs. A DIY airtight container also works well, and a food dehydrator is another great option.
How do you dry a 3D printed filament?
Filament can be dried at home using a kitchen oven pre-heated to the right temperature. The most accessible way to remove moisture from filament before 3D printing is to use an oven. That’s right, just your run-of-the-mill kitchen oven.
Can you dry out PLA filament?
Oven Drying – DIYers and professional 3D printers still utilize oven baking to get the moisture out of ABS and PLA filament. The drying process is similar to baking your favorite thanksgiving turkey. Just place your filament spool inside an oven and set it at the right temperature: 104 to 113°F (40 – 45 °C) for PLA.
Why is 3D printer filament dry?
For the 3D printing process to run properly, it is essential to prepare the filament properly. Filament drying at the appropriate temperature eliminates moisture that the filament could have absorbed.
How do I know if my filament has moisture?
Different filaments absorb moisture at different rates, but there are a few common signs that you’ve got a wet spool: Popping or cracking sounds when extruding. Severely reduced part strength and layer adhesion. Uneven extrusion lines.
How do you rehydrate PLA filament?
Leaving PLA in a dry environment for a week or two should adequately re-dry it, or it can be gently heated to about 120F / 50C for a couple hours. (Some people dry it hotter.
Are filament dryers necessary?
Filament dryers are essential in 3D printing to keep filaments from getting wasted. However, whether you should buy one or get an alternative is the crucial question to ask. Ready-made filament dryers may be worth the price if you live in humid areas, 3D print often, and are willing to invest in it.
Filament Drying Guide
WHY you NEED TO DRY your FILAMENTS!
Reviving 7yr old filament with a $20 Dehydrator