How do you clean 3D prints after sanding?

Applying a coat of clear spray paint is another great way to quickly clean your SLA 3D prints. Spray painting the model will help conceal most small blemishes, and it will greatly reduce the need for further sanding and post-processing.

How do you shine PLA after sanding?

The technique to polish your prints is simple. Get a soft cotton cloth, and apply a small amount of liquid polish. Then apply to your 3D print surface in small circles until all the polish is rubbed into the surface. Once you’ve finished that, the surface should look reasonably shiny.

How do you surface finish PLA?

  1. Sanding. The most common method for smoothing PLA prints is sanding.
  2. Polishing.
  3. Priming.
  4. Epoxy resin.
  5. Solvents.
  6. Vapor smoothing.
  7. Heat gun smoothing.

How do you smooth a 3D printed surface?

The easiest and most common way to smooth PLA 3D prints is to sand and paint them. This process is the most time-consuming, but it yields excellent results when done thoroughly. With sanding, you are physically removing the layer lines, whereas with other methods, you are filling them in.

What can I use to clean my 3D prints?

Formlabs generally recommends the use of isopropyl alcohol (IPA) with a concentration of at least 90% to clean and dissolve uncured resin. In case you cannot acquire IPA, tripropylene glycol monomethyl ether (TPM) is a tested alternative for parts printed with non-biocompatible Formlabs resins.

Will rubbing alcohol clean resin?

Isopropyl alcohol (IPA) dissolves liquid resin, making it effective for washing parts printed on Formlabs SLA printers and for cleaning resin spills.

How do you clean PLA print 3D?

PLA is a common filament and it is simple to clean with mechanical tools, files, heat guns, sandpaper, and polishing tools. Resin or a clear spray paint may be utilized for an even smoother, shinier finish. ABS is another commonly used filament and it can be smoothed with a process known as vapor smoothing.


3D printing post processing for gloss and furry finishes

Smoothing PLA with Sandpaper

FINISHING 3D Prints LIKE A PRO! | Prepping + Sanding + Filling

Other Articles

What board does the cr10s Pro V2 use?

Where are Glowforge lasers made?

How do 3D printer heads move?

How do you install a Marlin on a 3D printer?

How do I print with Chiron Anycubic?