How long does it take to print 1kg of PLA?

And to allow for some variability, let’s put that at 5 to 9 hours of printing per week (or 20 to 36 hours per month). Under these conditions, you could expect to use about 40 to 70 g per week. Thus, a 1-kg spool of PLA should last you about 14 to 25 weeks, which equates to 4 to 6 months!

How long does 1KG filament take?

Based on our calculations, around 335 meters of filament in a 1-kilogram spool of PLA filament with a diameter of 1.75 millimeters.

How much PLA do I have left?

Find How Much Filament is Left on a Roll – YouTube

How long is a 1 kg roll of PLA?

According to Rigid Ink, based on PLA having a density of 1.25g/ml a 1KG spool of PLA would measure up at around 335 meters for 1.75mm filament and 125 meters for 2.85mm filament. In feet, 335 meters is 1,099 feet.

How fast can a stock ender 3 print?

Factor 3: Ender 3s’ Quirks – The maximum print speed for the Ender 3s is 200 mm/s, according to the manufacturer. However, that’s much faster than most users would be able to run it. In fact, this is usually the speed of a travel move rather than a print move.

How do I reduce printing time?

Bigger layer height will reduce print time. If accuracy does not matter, you can choose for printing with a larger nozzle and maximum layer height. The maximum layer height is 75% of the nozzle diameter. This means that with a 0.8mm nozzle you can build a layer of 0.6mm.

What is the best bed temp for PLA?

  • Having your bed level and extruder at the right height is extremely important when printing on glass.
  • If your first layer is not sticking.

How hot should you print PLA?

PLA prints at a relatively low temperature, typically printing between 190°C – 220°C. The optimal printing temperature of a PLA filament will vary depending on which printer you are using and more importantly will vary between filament brands.

Does PLA need a fan?

Does PLA Need a Cooling Fan? Yes, cooling fans significantly improves the print quality of PLA 3D prints. Many fan ducts or shrouds that direct the air to PLA parts work well to give better overhangs, bridging, and more detail overall. I would recommend using high quality cooling fans at 100% speed for PLA 3D prints.

What is a good printing speed?

A printer with an print output speed of less than 20 pages per minute will probably be pretty slow; a range of 20 ppm to 40 ppm is adequate for most offices; and a speed greater than 40 ppm is ready for higher-volume use (and such printers are priced accordingly).


The BEST 3D printing material? Comparing PLA, PETG & ASA (ABS) – feat. PRUSAMENT by Josef Prusa

PLA Dissolved in Water | Biodegradability Testing

Dry your PLA and Nylon 3d printer filaments the easy and cheap way. Build a chamber in 10 minutes!

Other Articles

Do you have to level a 3D printer every time?

Who invented the stereolithography 3D printing?

Can 3D printers print a 3D printer?

Why do I need a slicer to 3D print?

How do you level Creality in 3D printing?