What should my first 3D print be?

What should you 3D Print first? 3D Printing 101 – 2015

How thick should my first layer be 3D printing?

If you would prefer the first layer to be squished, a value of -0.05mm will be a good start. For a layer height of 0.2mm, this will give about 25% squish. Another way to think of this is that 100% of your extrusion will be forced into a space that is 75% of the layer height.

Why is my first layer so thin?

If your first layer is more thin than you expect it to be, the bed is too close to the nozzle. Note that you need to check the level an bed-to-nozzle distance once every few prints. Also, the first layer shouldn’t be a too thin layer, the Cura default for a 0.4 mm nozzle is about 0.28 mm.

What should the initial layer height be?

Summary. Initial Layer Height: For a 0.2-mm layer height, you can keep this at 0.24 mm or 0.28 mm. Initial Layer Width: For a 0.4-mm layer width, adjust this to around 0.44 mm or even 0.48 mm.

How often should I level my bed?

In order to stay on the safe side, it is advisable to level the bed before a large print (15 hours or longer) to ensure that it doesn’t fail mid-print. Additionally, it is advisable to re-level the bed every time you change the bed or nozzle temperature.

How do you squish the first layer?

Fixing First Layers on 3D Prints

What should the Z offset be?

Apart from ensuring a level bed, something you should consider is whether your printer is using the correct Z offset, which is the distance between the hot end and the Z home position on a 3D printer. Ideally, this value should match the distance between the hot end and the print bed.

What temperature should bed be for PLA?

The recommended bed temperature for PLA is 70C. Having your bed level and extruder at the right height is extremely important when printing on glass.

Does layer height affect bed leveling?

Leveling your bed with a sheet of paper is actually telling your machine that the top of your bed is higher than it really is. This will cause your first layer height to be different than what you set in your slicer. To prevent this, use the backlight method to level or use the thinnest paper you have available.

How far should print head be from bed?

I wondered to myself, just how far should a 3D printer nozzle be from the print bed? Your 3D printer nozzle leveling gap should be between 0.06 – 0.2mm from your printer bed to give it enough space to comfortably extrude material, which is about the width of a piece of paper.

What causes ripples in 3D prints?

When the printer speed is too high, you’ll notice ripples in your 3D models. Your printer may start shaking or become unstable, impacting your final print. The solution is to lower the print speed.

Is Ender 3 good for beginners?

The Ender 3 Pro is a good printer for beginners because it’s easy to set up and use and produces good-quality prints. Plus, it’s affordable, making it an excellent option for those just starting out in 3D printing. In addition, there are plenty of online tutorials to follow when using this printer.

Which ender 3 should I buy?

We think the Ender 3 V2 is the best choice here due to its upgrades for quiet printing, and its easier to use UI which will help your kids use the printer more easily.

Is the Ender 3 V2 beginner friendly?

The manual that Creality delivers with the printer is really concise and easy to understand so I think for even beginners this is a printer that everyone can build and there is no questions open.

Is the Ender 5 good for beginners?

The Ender 5 impresses with a good price-performance ratio. This makes this model a good choice for beginners.

How much is a starter 3D printer?

3D printers start at around $200 and can range up to many thousands of dollars. For a decent entry-level 3D printer for beginners, expect to spend between $200 to $400 for a good printer with some user-friendly features.

Does Ender 3 have heated bed?

The Creality Ender 3 features a modestly sized heated print bed that measures 220 x 220 x 250mm, which is nearly double that of the Ender 2.

Is Creality a good brand?

The Creality CR-10 is a wildly popular 3D printer and is often one of the first suggestions given to anyone seeking an affordable, high-quality machine. It even ranks among 3D Hubs’ highest-rated desktop printers (Q1 2018), coming in at number 7 with a print quality rating of 4.84 out of 5.

Are Ender 3D printers worth it?

However, the great support and solid output quality of this printer also make it easy-to-use. Whether you’re interested in buying your very first 3D printer or you’re looking to set up a fleet for manufacturing, the Creality Ender 3 Pro is one of the best 3D printers you can buy.

Is it difficult to use a 3D printer?

3D printing is quite hard, especially for beginners. It requires creativity, math, and computer-aided design (CAD) skills to master. However, once you have the necessary hardware and software, modeling skills, and an understanding of how this technology works, 3D printing becomes easier.

Is Ender 3 V2 worth?

The Ender 3 V2 is the ideal entry into 3D printing for little money. It has a large community and there are many buyable and printable upgrades. But it is also well suited for advanced users to reliably and cheaply print objects from standard filaments.

Can Ender 3 Use 3mm filament?

The components on the Ender-3 V2 are not compatible with 3mm filament. To make it work you would need a new extruder+ hot end system. The original mechanism is made for 1,75mm filament.

What filament can ender 3 use?

The Creality Ender 3 uses most of the common filaments, with the best filament for Ender 3 printers being PLA, ABS, and PETG. The Ender 3 can also use specialty filaments like TPU with a few basic Ender 3 upgrades.

How high can the Ender 3 print?

Note that, you can always directly extend your Ender 3’s capacity with the Ender Extender. These are hardware kits that allow you to reach print areas of 300 x 300 mm or even 400 x 400 mm.

What should I look for when buying a 3D printer?

Look for high-quality features like a heated glass bed, larger build volume, and an easy-to-use user interface. A quality printer includes a quality support system and sometimes built-in security protocols.

How big is the Ender 3 bed?

All three of the Ender 3s have an advertised and usable print area of 220 x 220 mm. However, the size of the build surface actually measures 235 x 235 mm. That means, in theory, an astonishing 14% of the print bed is going unused! Keep reading to learn more about why this is and what you can do about it.

How fast is the Ender 3 V2?

The maximum print speed for the Ender 3s is 200 mm/s, according to the manufacturer. However, that’s much faster than most users would be able to run it. In fact, this is usually the speed of a travel move rather than a print move.

What should my 3D print speed be?

A good print speed for 3D printing ranges from 40mm/s to 100mm/s, with 60 mm/s being the recommended. The best printing speed for quality tends to be in the lower ranges, but at the cost of time.

Is it better to 3D print fast or slow?

The general rule of thumb for 3D printing is slower speeds will yield higher quality.

Is PLA food safe?

PLA is a 3D printing material that is safe for food contact. With plastic injection molding, this material is used to make packaging.

What filament prints the fastest?

An innovative and robust thermoplastic filament, PLX can print up to 80% faster than a standard PLA material with no modification to the 3D printer at a strength that exceeds the typical mechanical properties of even ABS-printed parts – enabling industrial additive manufacturing in large-format at unprecedented speeds.

What are the best print settings for PLA?

We recommend an extruder temperature of 200°C for PLA and 210°C for PLA+. While PLA/PLA+ can be printed on an unheated bed, for best results we recommend and a bed temp of between 50°C – 60°C. If poor adhesion is an issue, print the first two layers ONLY with the bed at 65°C (and 60°C for every subsequent layer).

Does PLA need cooling fan?

Cooling is one of the most important aspects of printing with PLA. Having a dedicated part cooling fan makes a huge difference in the quality of the printed parts. The freshly extruded plastic needs to cool down below the glass transition temperature as quickly as possible.

How long can an ender 3 run?

46 Hours full tilt with no problems at all. You should be fine. Just make sure you keep a lookout for the filament and use a new spool if possible.

How long should a 3D print take?

On average, 3D printing an object can take anywhere from 30 minutes up to 12 hours to print. Sometimes, it can even take several days depending on how large and detailed your 3D model is.

What is a good printing speed?

A printer with an print output speed of less than 20 pages per minute will probably be pretty slow; a range of 20 ppm to 40 ppm is adequate for most offices; and a speed greater than 40 ppm is ready for higher-volume use (and such printers are priced accordingly).

What is a good speed for Ender 5?

On paper, the Ender 5 Plus achieves a maximum print speed of 200 mm/s. However, this is only on paper. In reality, the print speed is reduced to around 80 mm/s or less if you want to print high-quality and precise models. This value of 80 mm/s is also recommended by Creality.

Is ABS easy to print?

ABS does require more effort to print than PLA because it’s more heat resistant and prone to warping. This calls for a heated bed and an extruder that is 40-50 degrees Celsius hotter.

Does room temperature affect 3D printing?

Absolutely. Room temperature can have a serious impact on the quality of your prints. For some materials, like ABS and other higher temp plastics, the temperature in the room can have an even more dramatic effect. Too much temperature differential can cause the prints too cool too quickly causing defects.

How fast is SLS printing?

Printing speed for SLS may reach up to 48 mm/h while FDM can print up from 50 to 150 mm/h depending on the printer. When it comes to printing speed, DLP has the advantage. Since the entire layer of a 3D part is exposed to light at once, the printing process is quicker compared to SLA.

What is the fastest infill pattern?

Hexagon aka the honey comb

This shape is the most efficient infill and fastest to print, the goto infill for most things. It will save you material, time, energy and also offer high strength.

How thick should I make my 3D print?

A good minimum wall thickness for 3D printing PLA is 1.5 mm.

How many walls should I have on 3D print?

Common values for printing regular, moderately strong parts include a wall thickness of 0.8-1.6 mm (3-4 wall lines) and a top and bottom thickness around 0.8-1.2 mm (4-6 layers depending on the layer height set). For most cases, your slicer’s default values will be suitable.

Are walls stronger than infill?

100% infill vs max number of walls (or perimeters or shells)

How thick should PLA walls be?

What is a Good Wall Thickness for PLA? For PLA 3D prints, the best wall thickness is around 1.2mm. I’d recommend using a wall thickness of 0.8mm for standard prints that are for looks and aesthetics. For 3D prints that require strength and durability, try using a wall thickness of 1.2-2mm.

What is the thinnest you can 3D print?

Too thin walls

When scaling down a model, it could happen that walls become too thin to be printed. Most 3D printers have a set nozzle size with a diameter of 0.4mm or 0.5mm. Although this works for most models, problems could arise when layers smaller than this nozzle size need to be printed.

What is the strongest infill pattern?

Triangular Infill: Triangular infill is the strongest infill pattern because triangles are the strongest shape. They are least likely to deform and provide the best support structure behind the walls of the part.

What is a good wall line count?

Wall thickness and wall line count

In general, a wall thickness of two or three times the line width is sufficient. A higher value will create a sturdier model and decreases the chance of leaks, while a lower value can significantly decrease the print time and filament costs.

What is the minimum wall thickness for good printability?

A wall thickness of at least 1mm minimum is a good rule thumb.

What should my top bottom thickness be?

Top/bottom thickness

It is advised to always use a multiple of the layer height for the thickness of the top and bottom. This means, for example, that with a layer height of 0.15 mm, it’s better to set the top/bottom thickness to 0.6 mm rather than 0.7 mm.

What is the typical layer thickness for 3D printing?

Formlabs 3D printers support layer thicknesses between 25 to 300 microns, depending on the material. This selection of layer heights gives you the ideal balance of speed and resolution.

What is a good 3D print speed?

A good print speed for 3D printing ranges from 40mm/s to 100mm/s, with 60 mm/s being the recommended. The best printing speed for quality tends to be in the lower ranges, but at the cost of time.

What should shell thickness be?

The rule of thumb is that the shells are usually printed with a thickness of 0.8 mm.

How thin can you resin print?

The minimum wall thickness refers to the minimum thickness that your model should have for any given material or technology. As for resin 3D printing, it’s better to go quite fine with minimum wall thicknesses of 2 mm.

How thin can you 3D print metal?

Bear in mind that no elements or walls thinner than 0.5 mm are recommended. Selective laser sintering or melting may cause the distortion of the shape due to the high heat.

How many bottom layers 3D printing?

Generally you will want 5 to 10 layers for solid flat tops on parts. Generally, the thinner each layer, the more layers are needed to bridge smoothly over infill. So for 0.2mm layers, you might go for 1mm thickness = 5 layers. For 0.06mm layers (the thinnest I usually do), I go with 0.6mm top/bottom = 10 layers.

What is a good size 3D printer?

With the average printing bed size of a 3D printer intended for general use being around 150–300mm, if you wanted to scale up the size of your 3D creations, a printer of 350mm–500mm would be ideal, and luckily, there are a few worthy large-scale models available on the market for you to choose from.

What does PLA stand for 3D printing?

Polylactic Acid (PLA) ranks as one of the most popular materials for 3D printing, particularly FDM. Its ease of use and minimal warping issues make PLA filaments the perfect starting point for 3D printing. PLA is also one of the most environmentally-friendly 3D printing materials and, unlike ABS, is biodegradable.


Related Videos

My first 3D Print – Basic Advice 4 Beginners

Getting your FIRST 3d Printer – What to keep in mind

What should you 3D Print first? 3D Printing 101 – 2015


Related Articles

How do you put filaments in Ender 3?

What size should I print my DND minis?

Is TPU hard to print?

How do you make a 3D printed airplane?

Can SketchUp Free be used for 3D printing?